Dating fender telecaster body dating site in ukrine
"And the action is determined by the string height in relation to the fingerboard. And a very subtle change in angle can throw it off." He's not exaggerating; more than once he says he has unscrewed a neck from a Fender guitar to find a few pieces of paper or a match cover stuffed in the joint — items that guitar assemblers added to make minor, but essential, adjustments in the angle of the neck."So," he stressed, "the neck should only be removed by an experienced guitar repairman or technician." Kerry, who has repaired instruments as well as appraised them, could tell by the tension as he turned the screws that they had never been removed before.Kerry then began removing the screws that held the guitar's neck to its body, raising a question for everyone who owns a Fender electric guitar: Is this a maneuver you should try on your own?"My advice would be, 'Don't try this at home,'" Kerry told us. "The angle at which the neck is joined to the body is critical in maintaining the 'action,'" he said.
The only way to try to narrow the date range of your specific instrument is to remove the neck and check the butt end of the neck heel for a production date, which may be stamped or written there (if you`re uncomfortable doing this yourself, please refer to an experienced professional guitar tech in your area). Serial numbering didn`t change immediately because instruments continued to be made using existing, tooling, parts and serial number schemes.
The chart below details Fender serial number schemes used from 1965 to 1976.
The charts below detail the most common Fender serial number schemes from 1976 to the present.
And one of the geniuses of Leo Fender's inventions was to bolt the neck on with four very simple bolts and a neck plate. And at the same time, it made for very easy repair when these instruments needed it." But before he began taking out the screws from the plate to remove the guitar's neck, Kerry asked the woman for permission to operate.
"We're going to sort of go somewhere where no one else has ever been," Kerry said, "if you're comfortable with that." "I'm looking forward to it," she replied.
Search for dating fender telecaster body:
But if he found out the guitar was made in 1958 or 1960 rather than 1959, would it have influenced the guitar's value?